XRBD Monoblock® Series
- Compact & Lightweight
- Universal Input, Power Factor Corrected
- Can be Mounted in Any Physical Orientation
- Analog Monitoring Interface, Standard RS-232 Digital Interface and Ethernet
- Data Logging and Firmware Controlled X-Ray Tube Seasoning
100W, 210W, 350W and 500W X-Ray Source
Spellman’s XRBD Series of Monoblock® X-Ray sources are designed for OEM applications powering their internal bipolar X-Ray tube at 160kV at power levels of 100W,210W, 350W and 500W. Features such as universal input, compact package size and a standard RS-232 digital interface simplify integration of any XRBD model into your X-Raysystem. Each XRBD model is available with fan shaped (standard) or cone shaped (optional) beam geometries. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.
TYPICAL APPLICATIONS
Food Inspection Systems, Fill Level Confirmation Systems, Security Scanning Systems, Industrial NDT Systems, Thickness/Plating Measurement Systems
- Specifications
- Models
- How to Order
Specifications
(Ref. 128132-001 REV. L)
- Options:
CB
Cone Beam
.5mm - Beam Filter:
ST-TE, RA-SE, RA-TE
See page 4 for Cable Options. - X-Ray Characteristics:
- Focal Spot:
0.8mm (IEC 336)
0.5mm (IEC 336) optional - Beam Filter:
- Ultem:
1.50mm ±0.15mm - Oil:
9.0mm ±0.25mm - Glass:
1.7mm ±0.2mm - Be:
0.8mm - Beam Geometry:
- Fan:
Standard. The beam angular coverage will be 80° with the beam plane perpendicular to the X-Ray tube axis and 12° wide (with a 2° tolerance) - Cone:
Optional. 40° cone beam (with a 2° tolerance) - Input Voltage:
100-240Vac, ±10%, 50/60 Hertz, .98 power factor - Input Current:
100W @ 1.4A
210W @ 2.8A
350W @ 4.6A
500W @ 6.6A - X-Ray Tube Voltage:
See table. Minimum kV for emission current 35kV - X-Ray Tube Current:
See table. Minimum emission current 150uA - X-Ray Tube Power:
See table - Voltage Regulation:
- Line:
±0.05% of maximum output voltage over a ±10% change of nominal input line voltage - Load:
±0.1% of maximum rated voltage for 150uA to full rated load change - Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value - Voltage Risetime:
Standard ramp time shall be <500ms from 10% to 90% of maximum rated output voltage - Voltage Ripple:
0.5% peak to peak of maximum voltage for frequencies ≤1kHz
Emission Current Parameters - Current Regulation:
- Line:
±0.05% of rated output current over a ±10% change of nominal input line voltage - Load:
±0.1% of rated output current for a change from 50% to 100% of rated output voltage - Current Accuracy:
Current measured through the X-Ray tube is within ±2% of the programmed value - Current Risetime:
- Standard:
Ramp time shall be <500ms from 10% to 90% of maximum rated current - Arc Intervention:
4 arcs in 10 seconds with a 100ms quench/100ms re-ramp = Shutdown - Filament Configuration:
Internal AC filament drive with closed loop filament emission control
Models
MODEL SELECTION TABLE
| Model | Maximum Voltage | Maximum Current | Maximum Power |
|---|---|---|---|
| XRBD160PN100 | 160kV | 1mA | 100 watts |
| XRBD160PN210 | 160kV | 2.1mA | 210 watts |
| XRBD160PN350 | 160kV | 3.5mA | 350 watts |
| XRBD160PN500 | 160kV | 4mA | 500 watts |
How to Order
Subscribe to our high voltage newsletter
Subscribe to our high voltage newsletter, published quarterly with relevant information on high voltage power supply technology and applications.