XRB80N100 Monoblock®
- Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
- Compact & Lightweight
- Universal Input, Power Factor Corrected with Internal EMI Filter
- Can be Mounted in Any Physical Orientation
- Analog Control Interface and Standard RS-232 Digital Interface
Certifications & Compliance
80kV, 100W X-Ray Source
Spellman’s XRB80N100 Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 80kV at 100W. Features like universal input, small package size and a standard analog and RS-232 digital interface simplify integrating this unit into your X-Ray system. The XRB80N100 is available either with fan shaped (standard) or (optional) cone shaped beam geometries. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.
Typical XRB80N100 Monoblock® Integrated X-Ray Source applications:
- X-Ray Scanning: Bone Densitometry
- Thickness Measurement
- Food Inspection
- Fill Level Confirmation
- Parcel Inspection
- Specifications
- Downloads
Specifications
(Ref. 128065-001 REV. Y)
- X-Ray Characteristics:
- Focal Spot:
0.5mm (IEC 336) - Beam Filter:
- Ultem:
3.30mm ±0.15mm - Oil:
8mm ±0.1mm - Glass:
1.8mm ±0.25mm - BE:
0.8mm - Beam Geometry:
- Fan:
Standard. The beam angular coverage will be 75° with the beam plane perpendicular to the X-Ray tube axis and 13° wide. - Cone:
Optional. 25° cone beam - Input Voltage:
Power factor corrected input 0.98, 100-240Vac ±10%
50/60Hz, 2A, maximum - X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable up to 80kV - X-Ray Tube Current:
150uA to 1.25mA over specified tube voltage range - X-Ray Tube Power:
100W, maximum continuous - Voltage Regulation:
- Line:
±0.05% of maximum output voltage over a ±10% change of nominal input line voltage - Load:
±0.1% of maximum rated voltage for 150uA to 1.25mA load change - Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value - Voltage Risetime:
- Standard:
Ramp time shall be 500ms from 10% to
90% of maximum rated output voltage - Optional:
5 seconds. Specify at time of order - Voltage Overshoot:
5% of maximum voltage, to return within 2.5% of
maximum voltage in less than 100ms - Voltage Ripple:
1% peak to peak of maximum voltage for
frequencies
≤
1kHz
Emission Current Parameters - Current Regulation:
- Line:
±0.05% of rated output current over a ±10% change of nominal input line voltage - Load:
±0.1% of rated output current for a change from 50% to 100% of rated output voltage - Current Accuracy:
Current measured through the X-Ray tube is within ±2% of the programmed value - Current Risetime:
- Standard:
Ramp time shall be 500ms from 10% to 90% of maximum rated current - Optional:
5 seconds. Specify at time of order - Arc Intervention:
3 arcs in 10 seconds with a 200ms quench = Shutdown - Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control
Subscribe to our high voltage newsletter
Subscribe to our high voltage newsletter, published quarterly with relevant information on high voltage power supply technology and applications.