Contact

XRB160PN480/CT Monoblock®

Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
Compact & Lightweight
Can be Mounted in Any Physical Orientation
Standard RS-232 Digital Interface

Certifications & Compliance

Spellman’s XRB160PN480/CT Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 160kV at 480W. Features like smallpackage size and RS-232 digital interface simplify integrating this Monoblock® into your X-Ray system. Standard models are available with fan shaped beam geometry. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.

Typical applications:

X-Ray Scanning: Food Inspection
Fill Level Confirmation
Security Applications

Specifications
Downloads

Specifications

^{(Ref. 128083-001 REV. J)}

X-Ray Characteristics:
Tube Type:
Glass tube, Tungsten target, Be filter
Focal Spot:
0.8mm x 0.8mm (IEC336)
Beam Filter:
1.75mm of glass, 1mm of Al, and 10mm of oil
Beam Geometry:
Symmetrical fan 105° ±3° x 4° ±1°
Input Voltage:
Monoblock®:
100-240Vac ±10%, 50/60Hz, 6.5A max
Heat Dissipation Unit:
24Vdc, 3A
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 20kV to 160kV
X-Ray Tube Current:
0.3mA to 6mA over specified tube voltage range
X-Ray Tube Power:
320W continuous, 480W peak
Voltage Regulation:
Line:
±0.1% for a ±10% input line change of nominal input line voltage
Load:
±0.1% for a 0.3mA to 6mA load change
Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±1% of the programmed value
Voltage Risetime:
Ramp time shall be <1 second from 1% to 90% of rated output
Voltage Overshoot:
Within 5% of rated voltage
Voltage Ripple:
0.1% p p of rated voltage @ ≤1kHz
Current Regulation:
Line:
±0.5%
Load:
±0.5%
Current Accuracy:
Current measured through the X-Ray tube is within ±1% of the programmed value
Current Risetime:
<1 second from 1% to 90% of rated output
Arc Intervention:
4 arcs in 10 seconds = Shutdown
Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control
Digital Interface:
RS-232
Control Software:
A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.
Interlock Signals:
A hardware interlock functions in digital programming modes.
Operating Temperature:
0°C to +40°C
Storage Temperature:
-40°C to +70°C
Humidity:
5% to 90% relative humidity, non-condensing
Cooling:
Heat exchanger w/fan and oil pump, powered from AC
Input Line Connector:

Downloads

Monoblock® Brochure

Subscribe to our high voltage newsletter

Subscribe to our high voltage newsletter, published quarterly with relevant information on high voltage power supply technology and applications.