Back
Browse Products By:
APPLICATIONS
Back
Browse Products By Application
View All Applications

MSA

  • Compact High Performance Module
  • Variable Voltage Programming
  • 0.9 Watts Output Power
  • Voltage Monitor
  • Arc and Short Circuit Protected

Certifications & Compliance

Get a Quote

MSA

The MSA Series are compact printed circuit board mountable (PCB) high voltage power supply module available from 1kV to 3kV with either a positive or negative output polarity. The MSA Series feature 0-10Vdc variable voltage programming that equals 0-100% of rated output voltage. A voltage monitor is provided where 0-10Vdc equals 0-100% of rated output voltage. Additionally a status signal and enable signal provides simple control of the power supply. All units have in-built protection against fault conditions.

The MSA Series are intended for general use where a compact high performance PCB mountable power supply is required, like driving an electron multiplier in a mass spectrometer. The aluminium enclosure helps shield the unit reducing radiated noise.

 


  • Specifications
  • Models
  • Downloads

Specifications

  • Input Voltage:
    +24 Vdc, ±2Vdc
  • Input Current:
    150mA maximum input current
    30mA pk-pk maximum input current ripple
  • Output Voltage Accuracy: ±1%
    Voltage Regulation:
    Line: 21.6Vdc to 26.4Vdc, ±0.02%
    Load: 0-100% rated load, ±0.02%
    Stability: 50ppm/8hrs after one hour warm up period
    Temperature Coefficient: 25ppm per degree C
  • Ripple: See the Models tab
  • Output Polarity:
    Positive or negative, specify at time of order
  • Dimensions:
    2.73˝ L x 2.21˝ W x 1.21˝ D (69.4mm x 56.2mm x 30.7mm)
  • Weight:
    7.0 oz. (200g)
  • Regulatory Approvals:
    Compliant to EEC Low Voltage Directive. RoHS Compliant.

Models

MSA SELECTION TABLE

ModelOutput VoltageOutput CurrentRipple (Vpp)
MSA1*240-1kV0-900μA30mV
MSA2*240-2kV0-450μA40mV
MSA3*240-3kV0-300μA50mV

1) Replace the * with “P” for positive output polarity and “N” for negative output polarity.

2) The ripple figure includes random non switch related noise, noise related to the oscillator, switching and feedback control circuitry and noise associated with the rectified primary switching frequency.

Typical applications:

  • Photomultiplier Tubes
  • Electron Multiplier
  • Mass Spectrometry
  • Electrostatic Lenses
  • Nuclear Instruments
Service Solution Brochure

Spellman Repair Centers, Extended Warranty Programs, Preventative Maintenance Programs, Calibration Services and more.

Download
2026 High Voltage Reference Manual

We compiled all of our useful FAQ’s, application notes, articles, technical papers and three glossaries into a single handy reference guide.

Download