CCM1KW Series
- Compact & Lightweight Package
- Factor Corrected Input
- Cost Modular OEM Platform
- Resonant Soft Switching Inverter Topology
- UL/CUL Recognized; RoHS Compliant
Certifications & Compliance
Spellman’s CCM1KW capacitor charging module is designed to provide up to 1000 Joules per second at an output voltage up to 4000 Volts. The power factor corrected AC input, small package size and both a comprehensive and minimal analog interface simplifies integrating the CCM1KW into your OEM system design. Available in either positive or negative polarity, the CCM1KW is fully arc, open and short circuit protected. Units can be operated in parallel for applications requiring higher power (see manual for details).
Typical applications:
- UV light sources for curing and sterilization Industrial and medical laser applications
- Specifications
- Models
Specifications
(Ref. 128103-001 REV. K)
- Input Voltage:
90-264 Vac, 50/60 Hertz, power factor corrected input ≥0.98 - Input Current:
14 Amps worst case, 1000 Joules per second
7 Amps worst case, 500 Joules per second - Efficiency:
>85% - Output Power:
1000 Joules per second, 500 Joules per second - Output Voltage:
0-1kV, 0-2kV and 0-4kV version available - Output Polarity:
Positive or negative, specify at time of order - Stored Energy:
Less than 0.2 Joules - Pulse to Pulse Repeatability:
±0.2% up to 1kHz - Temperature Coefficient:
≤ 100ppm per degree C - Fault Diagnostic System:
Over Temperature and Over Voltage Over Voltage Fault is latched requiring AC power recycle to clear. Over Temperature Fault is latched but can be cleared via inhibit/fault reset line. - Environmental:
Temperature Range:
Operating: 0°C to 40°C
Storage: -40°C to 85°C - Humidity:
10% to 90% RH, non-condensing - Cooling:
Forced air - Input Line Connector:
2 position Phoenix MSTB connector, straight and right angle mating connector provided - HV Output Connector:
Standard: Kings/Winchester Electronics SHV 1707-1
Optional: Amphenol MHV UG-931/U - Interface-A Connector:
15 pin D, female - Interface-B Connector:
4 pin male Molex 705530038 - Ground Stud:
10-32, nut supplied - Dimensions:
3. H X 6. W X 9. D (76.2mm x 152.4mm x 228.6mm) - Mounting:
M4 screw. Max. depth is 0.188. (4.78mm) - Weight:
6.9lb. (3.13kgs) - Regulatory Approvals:
Compliant to 60601-1-1. Compliant to 60601-1-2. UL/CULrecognized file E242584. RoHS compliant.
Models
CCM1KW SELECTION TABLE kV JOULES/SECOND
| kV | Joules/Second | Model |
|---|---|---|
| 1 | 500 | CCM1*500 |
| 2 | 500 | CCM2*500 |
| 4 | 500 | CCM4*500 |
| 1 | 1000 | CCM1*1000 |
| 2 | 1000 | CCM2*1000 |
| 4 | 1000 | CCM4*1000 |
*Specify P for positive or N for negative 500 J/s units have a single internal fan, 1000 J/s units have both an internal and external fan.
Service Solution Brochure
Spellman Repair Centers, Extended Warranty Programs, Preventative Maintenance Programs, Calibration Services and more.
Download
2026 High Voltage Reference Manual
We compiled all of our useful FAQ’s, application notes, articles, technical papers and three glossaries into a single handy reference guide.
DownloadSubscribe to our high voltage newsletter
Subscribe to our high voltage newsletter, published quarterly with relevant information on high voltage power supply technology and applications.