XRBe80PN300 Monoblock® Series
- Compact & Lightweight
- Universal Input, Power Factor Corrected
- Can be Mounted in Any Physical Orientation
- Analog Monitoring Interface, Standard RS-232 Digital Interface and Ethernet
- Data Logging and Firmware Controlled X-Ray Tube Seasoning
*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.
80KV/300W Be Window Monoblock®
Spellman’s XRBe80PN300 beryllium window Monoblock® X-Ray sources are designed for OEM applications powering the internal Bipolar X-Ray tube at 80kV at a power level of 300W. Features such as universal input, compact package size and a standard RS-232 digital interface simplify integration of the XRBe80PN300 into your X-Ray system. It is available with a cone shaped beam geometry. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.
TYPICAL APPLICATIONS
Food Inspection Systems, Fill Level Confirmation Systems, Security Scanning Systems, Industrial NDT Systems, Thickness/Plating Measurement Systems
- 사양
- 다운로드
사양
(Ref. 128132-001 REV. C)
- Options:
ST-TE, RA-SE, RA-TE
Cable Options (see page 3 of the data sheet) - X-Ray Characteristics:
- Focal Spot:
0.8mm (IEC 336) standard - Beam Filter:
Be 0.8mm - Beam Geometry:
- Cone:
Standard. The beam angular coverage will be 40° with the beam plane perpendicular to the X-Ray tube axis - Input Voltage:
100- 240Vac, ±10%, 50/60 Hertz, .98 power factor - Input Current:
300W @ 6A - X-Ray Tube Voltage:
Maximum 80kV - X-Ray Tube Current:
Maximum 5mA - X-Ray Tube Power:
300W - Voltage Regulation:
- Line:
Line:±0.05% of maximum output voltage over a ±10% change of nominal input line voltage - Load:
±0.1% of maximum rated voltage for 150uA to full rated load change - Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value - Voltage Risetime:
Standard ramp time shall be <500ms from 10% to 90% of maximum rated output voltage - Voltage Ripple:
0.5% peak to peak of maximum voltage forfrequencies ≤1kHz - X-Ray Tube Voltage:
Maximum 80kV
Emission Current Parameters - Current Regulation:
- Line:
±0.05% of rated output current over a ±10% change of nominal input line voltage - Load:
±0.1% of rated output current for a change from 50% to 100% of rated output voltage - Current Risetime:
Standard ramp time shall be <500ms from 10% to 90% of maximum rated current - Arc Intervention:
4 arcs in 10 seconds with a 100ms quench/100ms re-ramp = Shutdown - Filament Configuration:
Internal floating AC filament drive with closed loop filament emission control circuitry
다운로드
스펠만 고전압 뉴스레터를 구독하세요
분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.