문의하기

XRB80PN100HR Monoblock® Series

Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
Compact & Lightweight
Universal Input, Power Factor Corrected with Internal EMI Filter
Can be Mounted in Any Physical Orientation
Analog Monitoring Interface and Standard RS-232 Digital Program and Monitor Interface
Data Logging and Firmware Controlled X-Ray Tube Seasoning (Smart Controller Option Only)

Certifications & Compliance

80kV, 100W Integrated X-Ray Source

Spellman’s XRB80PN100HR (high reliability) Monoblock® X-Ray source is designed for OEM applications powering its internal Bipolar X-Ray tube up to 80kV at 100W. Features like universal input, small package size and a standard RS-232 digital interface simplify integrating this Monoblock® into your X-Ray system. The XRB80PN100HR is available either with fan shaped (standard) or (optional) cone shaped beam geometries. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance. The XRB80PN100HR is designed for long field life and comes with a 3 year warranty.

Typical applications:

X-Ray Scanning
Thickness Measurement
Food Inspection
Fill Level Confirmation
Parcel Inspection

사양
주문 방법
다운로드

사양

^{(Ref. 128118-001 REV. N)}

X-Ray Characteristics:
Focal Spot:
0.8mm (IEC 336) standard
0.5mm (IEC 336) optional
Beam Filter:
Ultem:
3.00mm ±0.15mm
Oil:
7.5mm ±0.25mm
Glass:
1.7mm ±0.2mm
Be:
0.8mm
Beam Geometry:
Fan:
Standard. The beam angular coverage will be 80° with the beam plane perpendicular to the X-Ray tube axis and 20° wide (with a 2° tolerance)
Cone:
Optional. 20° cone beam (with a 2° tolerance)
Input Voltage:
Power factor corrected input 0.98, 100-240Vac ±10% 50/60Hz, 2A maximum
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable 40kV (±20kV) to 80kV (±40kV)
X-Ray Tube Current:
150uA to 2.00mA over specified tube voltage range (100W max.)
X-Ray Tube Power:
100W, maximum continuous
Voltage Regulation:
Line:
±0.05% of maximum output voltage over a ±10% change of nominal input line voltage
Load:
±0.1% of maximum rated voltage for 150uA to 2.00mA load change
Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±2% of the programmed value
Voltage Risetime:
Standard:
Ramp time shall be <500ms from 10% to 90% of maximum rated output voltage
Voltage Ripple:
0.5% peak to peak of maximum voltage for frequencies ≤1kHz
Emission Current Parameters
Current Regulation:
Line:
±0.05% of rated output current over a ±10% change of nominal input line voltage
Load:
±0.1% of rated output current for a change from 50% to 100% of rated output voltage
Current Accuracy:
Current measured through the X-Ray tube is within ±2% of the programmed value
Current Risetime:
Standard:
Ramp time shall be <500ms from 10% to 90% of maximum rated current
Arc Intervention:
4 arcs in 10 seconds with a 100ms quench/100ms re-ramp = Shutdown
Filament Configuration:
Internal AC filament drive with closed loop filament emission control
Analog Monitoring Interface:
Ground referenced 0 to 9Vdc for all monitoring signals.

주문 방법

How to Order:
Standard: Part No.: XRB80PN100HR
Cone Beam Option Part NO.: XRB80PN100HR/CB
0.5mm Focal Spot Option Part NO.: XRB80PN100HR/.5mm
80° X 10° Narrow Fan Beam Option Part NO.: XRB80PN100HR/NF
Cable Option: Part NO.: XRB*)PN100HR/RA
Smart Controller Option Part NO.: XRB80PN100HR/SC

다운로드

Monoblock® Brochure

스펠만 고전압 뉴스레터를 구독하세요

분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.