XRB200PN400 Monoblock®

Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics
Compact & Lightweight
Universal Input, Power Factor Corrected
Can be Mounted in Any Physical Orientation
Analog Monitoring and Standard RS-232 Digital Interface

Spellman’s XRB200PN400 Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 200kV at 400W. Features like universal input, small package size, standard analog monitoring and RS-232 digital interface simplify integrating this unit into your X-Ray system. Standard models are available with fan shaped beam geometry. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance.

Typical applications:

X-Ray Scanning: Food Inspection
Fill Level Confirmation
Security Applications

사양
다운로드

사양

^{(Ref. 128085-001 REV. H)}

X-Ray Characteristics:
Tube Type:
Glass tube, Tungsten target, Be filter
Focal Spot:
0.8mm X 0.5mm (IEC336)
Beam Filter:
Glass 1.8mm, Oil 10mm, Aluminum 1mm
Beam Geometry:
Symmetrical fan 85° x 10° ±1°
Input Voltage:
100Vac-240Vac ±10%, 50/60Hz, 6A maximum
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 100kV to 200kV
X-Ray Tube Current:
0.5mA to 2mA over specified tube voltage range
X-Ray Tube Power:
400W maximum continuous (350W average without external forced air)
Voltage Regulation:
Line:
±0.1% for a ±10% input line change
Load:
±0.1% for a 0.5mA to 2mA load change
Voltage Accuracy:
Voltage measured across the X-Ray tube is within ±1% of the programmed value
Voltage Risetime:
<1 second from 10% to 90% of rated output
Voltage Overshoot:
5% in less than 100ms
Voltage Ripple:
≤
0.2% p p of rated maximum voltage
Current Regulation:
Line:
±0.1% @ 100-200kV, 0.25mA to 2mA
Load:
±0.5% @ 100-200kV, 0.25mA to 2mA
Current Accuracy:
Current measured through the X-Ray tube is within ±1% of the programmed value
Current Risetime:
<1 second from 10% to 90% of rated output
Arc Intervention:
4 arcs in 10 seconds = shutdown
Filament Configuration:
Internal high frequency AC filament drive with closed loop filament emission control
Digital Interface:
RS-232 interface.
Control Software:
A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.
Interlock Signals:
A hardware interlock function is provided
Operating Temperature:
0°C to +40°C
Storage Temperature:
-40°C to +70°C
Humidity:
5% to 95% relative humidity, non-condensing
Cooling:
Heat exchanger w/fan and oil pump, powered from 24Vdc, 2A power supply (customer provided). External forced air cooling if needed to keep oil temperature below 55°C
Input Line Connector:
3 pin Phoenix Contact 1829167

다운로드

Monoblock® Brochure

스펠만 고전압 뉴스레터를 구독하세요

분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.