XRB180PN200 Monoblock®

180kV and 200W
X-Ray Tube Current: 0.5mA to 1.1mA
Focal Spot 0.8 x 0.8mm nominal (IEC60336)
Power factor corrected input to 0.98
100Vac to 240Vac, ±10%

*Note: All specifications are subject to change without notice. Please consult the English PDF version of this datasheet for the most up-to-date revision.

Spellman’s XRB180PN200 is an integrated X-Ray source operating up to 180kV and 200W, providing OEM users a compact plug-and-play Monoblock for critical inspection and screening applications. The unit incorporates a 25° angle stationary anode X-Ray tube offering a fan beam of 80°x 4°. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, with industry leading dose stability and image quality. This compact model comes with standard analog and RS-232 digital control. Spellman can provide customized versions of this platform for specific OEM system requirements.

TYPICAL APPLICATIONS

Aviation Security Screening: Checked Baggage/EDS, Checkpoint Vehicle Inspection, General NDT, Food Inspection

사양
다운로드

사양

^{(Ref. 128085-001 REV. A)}

X-Ray Characteristics:
Tube Type:
Stationary Anode, tungsten target
Focal Spot:
0.8 x 0.8mm nominal (IEC60336)
Beam Filter:
Consists of oil and the curved Ultem 0.079'' +/-0.01''. Inherent filtration in the X-Ray Tube is 1mm Be, 1.5mm +/-10% glass.
Beam Geometry:
Fan of 80° X 4°, ±1%
Anode Angle:
25°
Input Voltage:
Power factor corrected input to 0.98. 100Vac to 240Vac, ±10%, 50/60 Hertz. 5A, maximum
X-Ray Tube Voltage:
Nominal X-Ray tube voltage is adjustable between 90kV to 180kV.
Voltage Accuracy:
The high voltage measured at the X-ray tube will be within ±1% of the selected value.
Voltage Ripple:
Ripple will be ≤0.2% of maximum rated voltage for frequencies ≤1kHz
Voltage Regulation:
< ±0.1% for ±10% of nominal input line change
< ±0.1% for 0.5mA to 1.11mA load change
Voltage Overshoot:
kV overshoot will return within 5% of full voltage in less than 10ms
Risetime:
The voltage and current risetime is controlled by a ramping circuit. Ramp time is less than 0.5 second from 10% to 90% of output voltage and current.
X-Ray Tube Current:
0.5mA to 1.1mA @ 180kV, 200 Watts maximum
Current Accuracy:
<±1% of the selected value.
Current Regulation:
<0.5% at 90-180kV, 0.5mA to 1.1mA
Arc Intervention:
Unit will detect a single arc but HV will not shut down. If multiple arcs occur (4 in 10 seconds) then the unit will shut down.
Filament Configuration:
Internal high frequency AC filament drive operated in current mode with closed loop filament emission control.

다운로드

Monoblock® Brochure

스펠만 고전압 뉴스레터를 구독하세요

분기마다 발행되는 스펠만 고전압 뉴스레터를 구독하세요. 고전압전원장치에 대한 기술 정보와 최신 업계동향을 전달하여 드립니다.