uXRB130P65

Tubo de rayos X integrado y electrónica de control en un conjunto compacto
La interfaz digital estándar RS-232 ofrece acceso a diagnósticos y registros operativos
GUI estándar de prueba de Windows
Punto focal de 7 micrones para haz estrecho
Punto focal de 8 micrones para haz ancho
El espaciado de punto a ventana de 10 mm / 14 mm proporciona un gran aumento geométrico

*Nota: Todas las especificaciones están sujetas a cambios sin previo aviso. Consulte la versión en inglés en PDF de esta hoja de datos para obtener la revisión más actualizada.

Hoja de datos

130kV @ 65W X-Ray Source

Las fuentes de rayos X Monoblock® de microfoco μXRB130P65 de Spellman están diseñadas para aplicaciones de imágenes de alta resolución que alimentan su tubo interno de rayos X de microfoco de hasta 130kV a 65W. Las características como voltaje de entrada de 24 V CC, tamaño de paquete pequeño e interfaz digital estándar RS-232 simplifican la integración del μXRB130P65 en su sistema de rayos X. El tamaño de punto focal pequeño y redondo, optimizado sobre el rango de voltaje de operación, y el alto aumento, combinado con una salida estable de alta intensidad, proporciona imágenes 2D y 3D de calidad superior sin distorsiones.

Aplicaciones Típicas

Radiografía industrial:

Placa de circuito e inspección electrónica de componentes.
Pruebas no destructivas de alta resolución de piezas de metal y plástico.
Micro CT para aplicaciones industriales.
Inspección de la batería

Radiografía médica:

Micro CT para aplicaciones de ciencias de la vida.

Especificaciones

^{(Ref. 128082-001 REV. E)}

Options:

WB Wide Beam

ET Extended Tube (wide beam only)

LW Light Weight

The uXRB130P65 is ideal for applications such as printed circuit board inspection, battery inspection and industrial/medical micro CT.

Specifications:

Narrow Beam Benefits (Standard):

The small round spot is optimized over the range of kV and power to provide distortion free images. Operated at 4 watts yields a 6 micron spot for high resolution imaging. The 14mm spot to window spacing offers high geometric magnification.

Narrow Beam X-Ray Characteristics (Standard):

Spot Ellipticity: ±20% @ 16 watts, 130kV (either axis referred to average)

Beam Geometry: ≥ 53°, round beam, uniform beam profile in any direction

Spot to Window Spacing: 14mm ±0.5mm

Window Diameter ≈19mm

Window Material and Thickness: Beryllium, 0.25mm

Target Material: Tungsten

Wide Beam Benefits (WB Option):

The 115 degree round beam is well suited for automated
inspection where a large field of view is required for maximum throughput or off angled views. The 10mm spot to window spacing provides superior high geometric
magnification.

Wide Beam X-Ray Characteristics (WB Option):

Voltage measured across the X-Ray tube is within ±2% of the programmed value

Spot Ellipticity:

±20% @ 16 watts, 130kV (either axis referred to average)

Cone of Illumination: 115°, round beam, uniform beam profile in any direction

Spot to Window Spacing: 10mm ±0.5mm

Window Diameter (uncollimated): ≈38mm

Window Material and Thickness: Beryllium, 0.51mm

Target Material: Tungsten

X-Ray Leakage: Behind X-Ray tube is ≤0.5mR/hr at 2.55cm

Input Voltage:

+24-27Vdc

Input Current:

<6 amps

Anode Supply:

Output Voltage: 20kV to 130kV (referenced to Cathode Gun Supply)

Output Current: up to 0.5mA, from 20kV to 130kV

Environmental:

Operating Temperature: 0°C to +32°C

Storage Temperature: -20°C to +70°C

Humidity: 0 to 95%, non-condensing

Altitude: Up to 5,000 feet (1524 meters)

Cooling:

Internal fan is incorporated. Adequate air circulation around unit must be provided.

Digital Interface:

RS-232

Analog Interface:

0 to 10Vdc ground referenced signals

Digital Interface:

RS-232 interface.

Mechanical:

See drawings

Weight:

Standard: 30lbs. (13.60kg)

Standard/Extended Tube: 34lbs. (15.40kg)

Light Weight (LW option): 23lbs. (10.43kg)

Light Weight/Extended Tube: 27lbs. (12.24kg)

Regulatory Approvals:

Compliant to EEC EMC Directive.

Compliant to EEC Low Voltage Directive.

Graphical User Interface

J1 INPUT/OUTPUT—16 PIN AMP #206036-1 CONNECTOR

Pin	Signal	Parameters
1	Chamber Interlock Out	To close Chamber Interlock connect pin 1 to pin 2, R<2Ω
2	Chamber Interlock In	To close Chamber Interlock connect pin 2 to pin 1, R<2Ω
3	X-Ray ON Lamp Out	120Vac @ 3A/250Vac @ 1.5A rated contacts. Close at X-Ray ON
4	X-Ray ON Lamp In	120Vac @ 3A/250Vac @ 1.5A rated contacts. Close at X-Ray ON
5	N/C	N/C
6	Prime Power Interlock Out	To close Power Interlock connect pin 6, 7 to pin 8, 10, R<2Ω
7	Prime Power Interlock Out	To close Power Interlock connect pin 6, 7 to pin , R<2Ω
8	Prime Power Interlock In	To close Power Interlock connect pin 8, 10 to pin 6, 7, R<2Ω
9	N/C	N/C
10	Prime Power Interlock In	To close Power Interlock connect pin 8, 10 to pin 6, 7, R<2Ω
11	+24Vdc Input (+)	+24Vdc Input (+)
12	+24Vdc Input (+)	+24Vdc Input (+)
13	+24Vdc Return (-)	+24Vdc Return (-)
14	+24Vdc Return (-)	+24Vdc Return (-)
15	X-Ray On Indicator Out	24Vdc @ 3A rated contacts. Close at X-Ray On
16	X-Ray On Indicator In	24Vdc @ 3A rated contacts. Close at X-Ray On

J2 RS-232 DIGITAL INTERFACE—9 PIN AMP #788903-1 CONNECTOR

Pin	Signal	Parameters
1	DCD	Data Carrier Detect
2	RD	Received Data
3	TD	Transmitted Data
4	DTR	Data Terminal Ready
5	SGNO	Signal Ground
6	DSR	Data Set Ready
7	RTS	Request to send
8	CTS	Clear to Send
9	RI	Ring Indicator

SPOT TABLE

PARAMETER	NARROW BEAM	WIDE BEAM
Operating Voltage Range	45-130kV	50-130kV
Maximum Power	65W, 130kV	65W, 130kV
Maximum Beam Current	0.500mA	0.500mA
Spot Size 4 Watt	≤ 7μ, 45-130kV	≤ 8μ, 50-130kV
Spot Size 8 Watt	≤ 10μ, 45-130kV	≤ 14μ, 50-130kV
Spot Size 16 Watt	≤ 22μ, 45-130kV	≤ 24μ, 50-130kV
Spot Size 32 Watt	≤ 48μ, 70-130kV	≤ 48μ, 70-130kV
Spot Size 40 Watt	≤ 60μ, 80-130kV	≤ 60μ, 80-130kV
Spot Size 65 Watt	≤ 100μ, 130kV	≤ 100μ, 130kV