^{(Ref. 128158-001 REV. A)}

SPECIFICATIONS

Input Voltage:

100 to 240 Vac ±10% @1A max. 50 to 60 Hz ±5%

Environmental:

Operating Temperature: +10°C to +45°C ambient for normal operation. The unit will operate from 0°C but will require an extended warm up period.
Storage Temperature: -25°C to +60°C
Humidity: 0 to 85% RH, non-condensing

Mechanical:

The unit can be operated in any orientation. 

Front Panel Indicators:

-Power On
-Interlocks enabled (both interlocks are closed)
-HV On (any of the HV outputs are enabled)
-Warning (any of the internal warning levels exceeded)
-Operating (unit running correctly)
-Trip
-Fault
-Serial Bus (communication taking place)

Status Outputs:

The unit has three digital outputs to indicate status conditions through TTL signals (high when the corresponding LED is illuminated)
1  - HV on
2 - Fault
3 - Unit Operating

Test GUI:

A product GUI can be provided free of charge for customer testing and development work.

Interlocks: 

Two separate interlocks are provided:
Gun interlock: 24V output provided for an external volt free interlock

HV cable interlock: interlock plate mounted over the HV connector

If any interlock is not present: all high voltage supplies including filament are shut down, however communication over the serial interfaces remains operational.

Protection:

-All outputs are protected from arcs in the load (repetition rate up to 0.1 Hz) and continuous short circuit.
-The unit monitors the temperature of the main power semiconductors and shutdown the relevant outputs if a temperature become excessive. 
-All low voltage inputs are protected against over voltages of ±30 Volts.
-The power input is protected against over voltage and reversed connection.

Weight:

86 lbs. (39kg)

Regulatory Approvals:

Compliant to EEC Low Voltage Directive. UK Conformity Assessed. RoHS Compliant.