150kV、600W X線源

スペルマンのX線源Monoblock®XRB150PN600は、OEMアプリケーション向けに設計されており、内部のX線管に600ワットで最大150kVまでの電力を供給します。力率補正、小型パッケージ、標準アナログ、RS-232デジタル・インターフェースなどの機能により、XRBをお客様のX線装置に容易に組み込むことが可能です。標準モデルは、コーンビームのビーム形状です。独自のエミッション制御回路はX線管電流の調整に優れており、際立った安定性を提供します。

• X線スキャン: 骨密度測定
• 食品検査
• セキュリティ

Specifications

^{(Ref. 128079-001 REV. G)}

X-Ray Characteristics:

Tube Type:  Glass tube, Tungsten target, Be filter

Focal Spot:  0.5mm x 0.5mm (IEC 336)

Beam Filter:  0.06. Ultem

Beam Geometry:  Cone up to 18° ±1°

Input Voltage:

Vac, 50/60Hz, 6.5A maximum 200-240 +/-10% 

X-Ray Tube Voltage:

Nominal X-Ray tube voltage is adjustable between 70kV to 150kV

X-Ray Tube Current:

1.0mA to 4.0mA over specified tube voltage range

X-Ray Tube Power:

160W continuous, 600W peak Duty Cycle: 30 seconds on, 300 seconds off @ 600W peak

Voltage Regulation:

Line: ±0.1% for a ±10% input line change of 180 to 264Vac

Load: ±0.1% for a 1.0mA to 4.0mA load change. 600W maximum

Voltage Accuracy:

Voltage measured across the X-Ray tube is within ±2% of the programmed value

Voltage Risetime:

±1% in less than 300ms

Voltage Overshoot:

±10% during 300ms risetime

Voltage Ripple:

1% rms of rated voltage @ 10Hz to 1MHz

Current Regulation:

Line: ±0.1% from 180-264Vac

Load: ±0.5% @ 70-150kV, 1.0mA to 4.0mA

Current Accuracy:

Current measured through the X-Ray tube is within ±2% of the programmed value

Current Risetime:

±1% in less than 300ms

Arc Intervention:

4 arcs in 10 seconds with a 200ms quench = Shutdown

Filament Configuration:

Internal high frequency AC filament drive with closed loop filament emission control

Analog Interface:

0 to 5Vdc ground referenced signals

Digital Interface:

RS-232 interface.

Control Software:

A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request.

Interlock/Signals:

A hardware interlock function is provided

Operating Temperature:

0°C to +40°C

Storage Temperature:

-40°C to +70°C

Humidity:

10% to 95% relative humidity, non-condensing

Cooling:

External fan required. 250cfm minimum to maintain an oil temperature of 55C° or less.

Input Line Connector:

3 pin Phoenix Contact P/N 1829167

Analog Interface Connector:

10 pin Phoenix Contact P/N 1755503

Digital Interface Connector:

9 pin D connector, female

Grounding Point:

8-32 ground stud provided on chassis

Dimensions:

13.46" X 13.38" X 6.24"
(341.89mm X 339.85mm X 158.50mm)

Weight:

66lbs (30kg)

Orientation:

Can be mounted in any orientation.

X-Ray Leakage:

Less than 100mR/hr at 1m distance, measured at 140kV, 3mA.

AC INPUT POWER JB1 3 PIN PHOENIX CONTACT

 RS-232 DIGITAL INTERFACE— JB16 9 PIN FEMALE D CONNECTOR

ANALOG INTERFACE— JB15 10 PIN PHOENIX CONTACT

LED INDICATORS

Tables & Diagrams

DIMENSIONS: in.[mm]

FRONT VIEW TANK

SIDE VIEW TANK

TOP VIEW TANK

FRONT VIEW

CONTROL ASSEMBLY

SIDE VIEW

CONTROL ASSEMBLY

SIDE VIEW 

CONTROL ASSEMBLY

Note: All specifications are subject to change without notice. Please consult the PDF version of this datasheet for the most up-to-date revision.